USA
Français
Español
International
REZI-WELD 3/2 grout-patch is a moisture-insensitive, two-component epoxy kit for grouting, sealing base plates, and patching concrete.
Construction Grout (Canada)
Precision Grouting. Proven Strength.
When alignment, load transfer, or structural support is on the line, the right grout makes all the difference. Our precision, non-shrink, and high-performance grouts are built to fill the gaps—literally and figuratively—under the toughest conditions. Trusted across Canadian job sites, they’re engineered for reliability, flowability, and strength where it counts most.
REZI-WELD LV
REZI-WELD LV low viscosity injection epoxy is moisture insensitive, very low viscosity, high modulus, high strength structural injection resin. REZI-WELD…
EG-96 HP
EG-96 HP is a three-component, 100% solids, VOC and BGE1 free, epoxy resin system designed specifically for pours from 25.4…
REZI-WELD GEL PASTE STATE
REZI-WELD GEL PASTE STATE is a high viscosity, high modulus, rapid-setting, thixotrophic, structural, epoxy-based, chemical anchoring/bonding adhesive and injection gel.…
REZI-WELD LV STATE
REZI-WELD LV STATE is an ultra-low viscosity, two-component, 100% solids, rapid setting, epoxy-based, structural injection resin. It is a solvent-free,…
SPEED-E-ROC
SPEED-E-ROC is a pourable, rapid setting and hardening, high strength, hydraulic cement compound designed for anchoring and grouting. SPEED-E-ROC has…
REZI-WELD GEL PASTE
REZI-WELD GEL PASTE is a high viscosity, rapid setting, thixotropic, structural, epoxy-based, chemical anchoring/bonding adhesive and injection resin. REZI-WELD GEL…
MEADOW-PLUG
MEADOW-PLUG is a specially blended, extremely fast setting, hydraulic cement product designed to instantly stop running water or fluid seepage…
V-3 10K
V-3 10K grout is composed of graded sieve sizes of pure silica sand, high early strength cement, plus natural inorganic…
V-1
V-1 grout is composed of graded sieve sizes of pure silica sand and high early cement, plus natural inorganic and…
805 CONSTRUCTION GROUT – WINTER-GRADE
805 CONSTRUCTION GROUT WINTER-GRADE is a pre-blended Portland cement grout containing non-ferrous admixtures to counteract plastic and drying shrinkage. Complying…
803 CONSTRUCTION GROUT – SR
803 CONSTRUCTION GROUT – SR is a pre-blended Portland cement grout containing non-ferrous admixtures to counteract plastic and drying shrinkage.…
CG-86
CG-86 construction-grade grout is a non-ferrous, non-gaseous, non-shrink economical grout. It was specifically developed as a high-strength, cost-effective, general-purpose grout…
800 CONSTRUCTION GROUT
800 CONSTRUCTION GROUT is a pre-blended Portland cement grout containing non-ferrous admixtures to counteract plastic and drying shrinkage. The product…